The following content will display some of the examples of Skylark's strict quality control.
This is a custom-made product from a Korean customer, a customized color box, a master box, and a logo.
Some products have obvious defects during injection molding.
The waste material that needs to be opened on the color box is not cleaned.
The label on the outer box is a little crooked.
After negotiation with the factory, the factory arranged for workers to pick out the defective products, remove the packaging waste, replace the labels on the outer boxes. After the second inspection, sending the completed inspection report to the customer for confirmation, the goods are shipped out successfully.
This manicure polisher is customized by European customers with various models and some new designs offered by customers. The products need to be provided with product specifications and various grinding heads. In the inspection process,all the motor revolutions are tested, grinding head quality is tested. When all the goods is up to the standard, we offer a full test report to the customers.
This product is ordered by a Korean customer, which is used for wine table entertainment. There are three requirements: customized color box, outer box and sticker. The following problems were found in the process of providing the prenatal sample:
1. The turntable is not running long enough
2. The bubble shell is not labeled with the circulation mark
To solve the two problems, the factory added a cycle mark on the products, modified the mold, and installed a bearing at the rotating shaft to improve the time. After the customer confirmed, the bulk production could be carried out later. In the final inspection, 50% goods are inspected randomly and meet the standard, finally the goods could be shipped successfully.
This is a telescopic pants rack customized by Virginia from a South American. It requires put the instructions and labels on the products. In the process of inspection, the following problems were found:
1. Some plastic parts have a little burr, although it is not easy to touch, it is difficult to touch.
After negotiation with the factory, arrange the rework workers to remove burrs on the same day and make tests such as bearing load and dropping boxes, complete inspection report and bulk sample will be sent out after confirmed by the customer.
This is the frying basket customized by a Chilean customer Diego, which requires put instructions and labels on the products. Samples should also be sent to the inspection agency for an anti-corrosion test. There is no problem in the anti-corrosion test from pre-production samples and bulk samples provided by the factory as well as in the follow-up inspection.
On 2020.10.29， entrusted by our European customer to test the product quality in Taizhou city, zhejiang province. Customer ordered 40 hq container children's plastic chair which is a single set and packed into a carton.Drop test are necessary. After testing, the packaging can meet the requirements. But some dirt on foot tube were found. Through negotiation, the factory arranged workers work on it, and completed all of them within one day to meet the customer's requirements.
On 2020.04.16 entrusted by one customer in Europe to inspect the goods quality in wuyi city, Zhejiang province. Customere order 40hq camping tent. The customer requires that the glass fiber should be of good quality and the elastic rope should be imported with the waterproof coefficient up to PU3000mm. By examining, all the tent meets the requirements, but a part of the tent is rounded with thread residue. customer. requests factory rework and remove the excess thrum. Through 1.5 working days, all meet the customer's requirements during the reinspection, and the goods are shipped smoothly.
On 2020.5.16, entrusted by one customer in South America to test the product quality in Jining city Shandong province. Customer ordered 40hq container electric sprayer. After inspection, it was found that the LOGO on the medicine barrel printing was slightly falling. Some products' body have plastic thread that affects the product's Visual aesthetics.The factory is required to directly replace the defective printed products and clean the products with plastic burr edge. After good cooperation with the factory for rework, the above problems are solved during the reinspection. The products meet the customer's requirements and are shipped successfully.
